0

Snapmaker J1 – IDEX 3D tiskalnik

Snapmaker J1 3D Printer ima neodvisen dvojni ekstruder (IDEX), izjemno hitrost tiskanja in optimizacijo glajenja. Z litimi in CNC obdelanimi deli, linearnimi vodili, intuitivno programsko opremo in uporabniško usmerjenim dizajnom je J1 tudi izpopolnjen in trden 3D tiskalnik nove generacije.

Glavne značilnosti:

  • Tiskanje z dvema materialoma
  • Možnost uporabe Breakaway in vodotopnih podpornih materialov za odstranjevanje podpor brez napora
  • Zrcalni način, kopirni način tiskanja
  • Do 350 mm/s hitrost tiskanja in do 10000 mm/s² pospeška
  • Izjemna togost ohišja, visoko natančna linearna vodila in okvir iz aluminijeve zlitine
  • 5-palčni intuitivni zaslon na dotik

Servis, podpora in garancija proizvajalca. Največjo izbira filamentov, resin | smol, dodatkov in rezervnih delov v Sloveniji, …

Oznake: , , , , , , , , , , , , , , , , , EAN: 6971573440316

999,00 z DDV

ali
Hitro in enostavno obročno odplačevanje
Že od 25,73 €
Vaš mesečni obrok
Izračun obrokov
Enostavni obročni nakupi
Želim čim nižji obrok
48 x 25,73 €
Odplačati želim čim prej
6 x 178,33 €
Želim si izbrati svoje obroke
6 x 178,33 €

Leanpay omogoča enostavne obročne nakupe preko spleta. Za obročno plačilo v košarici izberi Leanpay.

Razpoložljivost:

Na zalogi

Cena izdelka
z DDV
Skupaj dodatnih možnosti:
z DDV
Skupaj naročilo:
z DDV
Featured Video

Opis

Snapmaker J1 – IDEX 3D tiskalnik

Snapmaker J1 3D Printer ima neodvisen dvojni ekstruder (IDEX), izjemno hitrost tiskanja in optimizacijo glajenja. Z litimi in CNC obdelanimi deli, linearnimi vodili, intuitivno programsko opremo in uporabniško usmerjenim dizajnom je J1 tudi izpopolnjen in trden 3D tiskalnik nove generacije.

Glavne značilnosti:

  • Tiskanje z dvema materialoma
  • Možnost uporabe Breakaway in vodotopnih podpornih materialov za odstranjevanje podpor brez napora
  • Zrcalni način, kopirni način tiskanja
  • Do 350 mm/s hitrost tiskanja in do 10000 mm/s² pospeška
  • Izjemna togost ohišja, visoko natančna linearna vodila in okvir iz aluminijeve zlitine
  • 5-palčni intuitivni zaslon na dotik

 

 

Hitro IDEX Tiskanje

V primerjavi z dvema skupnima glavama za več materialov, IDEX dvojna neodvisna glava zahteva manj časa za menjavo filamenta in ustvarja manj odpadkov. Poleg tega IDEX ponuja najčistejšo rešitev z dvema glavama, ki preprečuje križno kontaminacijo.

Vzporedno tiskanje

Prepolovite svoj čas čakanja, podvojite svojo produktivnost. IDEX je edini sistem ekstruzije z dvema ločenima ekstruderjema, ki se neodvisno premikata po osi X, kar vam omogoča, da lahko hkrati izvedete dva tiska.

Način kopiranja

Natisnite dva enaka predmeta hkrati. Še posebej je primeren za serijo tiskanja večih modelov hkrati. Če pride do težav pri enem tisku, lahko tisk ustavite, ne da bi to vplivalo na drugega. Ta način omogoča hitrejše tiskanje večje količine pri zagotavljanju tiskanja v omejenem času.

Zrcalni način

J1 neposredno zrcali vaš model in natisne original in zrcaljenega v eni rundi. Pri simetričnem modelu lahko uvozite polovico in jo natisnete v zrcalnem načinu, s čimer zmanjšate čas tiskanja za 50%, kar je popolno za hitre osnutke in konceptne modele. Kot v načinu kopiranje, lahko en tisk ustavite, ne da bi to vplivalo na drugega.

Kompenzacija vibracij

Snapmaker J1 vam omogoča tiskanje s hitrostjo do 350 mm/s, hkrati pa zagotavlja visoko ločljivost tiskanja. To je mogoče zaradi optimizacije tehnologije kompenzacije vibracij. Ta tehnologija zmanjšuje vibracije, ki jih povzročajo hitra gibanja, s čimer zmanjšuje neželeno tresenje in izboljšuje kakovost tiska. S maksimalnim pospeškom 10.000 mm/s² lahko zelo učinkovito ustvarite majhne modele z veliko podrobnostmi.

Seamless Extruders Switching and Cornering Optimization

During dual extrusion printing, the non-working extruder preheats while on standby, and starts printing right after the working extruder leaves, significantly reducing your waiting time. By analysing the extruders’ moving directions ahead of time, J1 can prevent problems like corner bulge, delivering better print quality at corners.

Speed Ensured by Elaborate Hardware Design

One-piece Die Casting: J1’s body comprises an upper frame and a base made by one-piece die casting, and four aluminum alloy bars. Making the body with just a few highly integrated parts—an approach long adopted by the automotive industry—facilitates precision assembly. J1 is so rigid and reliable with minimal wobble and deformation possible that you can print large projects one after another for a long time and get all prints of uncompromising quality.

High-precision Linear Rails : The industrial-grade linear rails are made by CNC grinding at the micron level, ensuring smooth and steady movements. A significant rise in precision, rigidity, and durability for you to savor a fast, accurate, and steady making experience.

Aluminum Alloy Frame : J1 inherits Snapmaker’s iconic all-metal design which users highly value for its rigidity and durability. It provides better heat dissipation with the main board and power supply spread out on the base and aluminum alloy as its main material. All electronic components well oiled, at your command.

Breakaway & Dissolvable supports

Building and removing support can look like rocket science sometimes, but we’ve done the math for you–steady support, clean interface, effortless removal, and minimal post-processing needed to maintain high dimensional accuracy. Breakaway filament offers the same support as normal materials but is much easier to remove without the need for further post-processing. J1 supports PVA and other dissolvable materials. Soak the print, and the supports dissolve, leading to a smooth surface and excellent dimensional accuracy. When you are looking for complex geometry, hollow structures, and exquisite details, this is for you.

Dual-material Printing

In one print, you make the most of two sets of properties. Combine the strength of nylon with the flexibility of TPU for functional parts. Print also multi-part objects. With no assembly, the object attains stronger interconnections, making it less prone to impairment.

Advanced Extruder Technology

300°C Hot Ends: 300°C maximum nozzle temperature comes in handy when you print with high-temperature filaments, like nylon, reinforced nylon, and PC. With silicone hot end socks preventing heat loss, filaments melting and heating up are much faster. Anti-clogging designs make the flow as smooth as possible.

Dual Direct Drive: Excellent extrusion accuracy that aids in the extrusion of flexible filaments, along with the high responsiveness of dual direct drives to make deposition faster, smoother, and more accurately controlled. It is built in with a filament sensor to inform you and pause the print job in the case of filament runout, nozzle clogging, and other abnormalities that fail filament loading.

Compact Extrusion Path: The compact extrusion path of a unique design allows you to print seamlessly with TPU and many other flexible materials.

Enclosed Space: It provides stable ambient conditions to facilitate the consistently reliable performance of high-temperature materials. For instance, it keeps ABS and many other materials from warping.

Calibration Done Easy

We utilize electrical conduction to locate the two hot ends and the heated bed and measure the distances between the three entities—a creative solution to complex IDEX calibration. This time saver enables you to complete the calibration in 10 minutes under the Assist Mode.Taking away the calibration card and the judgement call, it reduces errors and arrives at better accuracy.

Hands-free XY Offset Calibration: When the two hot ends touch the square opening on the heated bed, it sends out electronic signals to suggest their exact locations, and J1 calculates the offsets between them. J1 then auto-compensates the offsets during printing to ensure perfect XY alignment that avoids layer shifting and improves the success rate of dual-material prints. It takes away the long learning curve and saves you from scrutinizing through an awful lot of lines. Tap start, and lay back for elevated precision.

Tool-free Bed Leveling: A level print bed lays the foundation for successful 3D prints, but the bed leveling of IDEX printers can be very time-consuming. Using a PEI glass plate of high flatness, J1 can downsize from a 3 × 3 (9 points) or 4 × 4 (16 points) leveling to a 3-point one with no compromise on levelness and downtime dropped by 70–80%. Turn the leveling wheel as guided on the touchscreen, and the bed is leveled for tip-top first-layer adhesion.

Easily-managed Z Offset Calibration: Using electrical conduction, J1 can calculate the distances between the hot ends and the heated bed. Thus, we were able to cut the step of moving the calibration card back and forth while adjusting the Z offset. Simply turn the thumb wheel as guided on the touchscreen and you are now the Z offset calibration guru!

Custom PEI Glass Plate

J1’s build plate is made of glass with sheer flatness, making your first layer smooth and adhesive. Glossy glass on one side and PEI coating on the other side, aiding in adhesion for various filaments. The plate can be easily removed so that it is extra handy for maintenance and print removal.

Easy-swap Hot Ends

Loosen the two screws on the hot end, fix or replace the hot end, and go back to printing at once. For the adventurers going for more variations and advanced applications, we offer multi-diameter hot ends from 0.2 mm for detail accuracy to 0.8 mm for faster printing, and hardened hot ends for engineering materials

Built-in Nozzle Wipers

Scrape excessive materials off nozzles and halt the oozing from the just-active extruder to free multi-material prints from blobs and stringing. The extruder can start its print job in line without waiting for the just-active one to cool down. Switching between extruders takes much less time, once again minimizing downtime.

Technical specifications
Usable Filament Diameter 1.75 mm
Max Nozzle Temperature 300 ºC
Open Filament System Yes
Extruder Type Direct drive
Build Area 300 mm x 200 mm x 200 mm
Build Plate Temp Max 100 ºC
Build Plate Surface PEI
Build Plate Material glass
Build Plate Attachment clamp
Build Chamber During Process Open or Closed
Extruder Number Of 2
Extruder Construction Type Dual IDEX – Independent Dual Extruders
Installation Space / Requirements
Total Mass Overall Dimensions 539 mm x 401 mm x 464 mm
Total Weight 25 kg
Ambient Operating Temperature 10°C – 35°C
Max Power Consumption 400 W
Voltage AC: 100 V – 240 V, 4,4 A (50-60 Hz)
DC: 24 V
Equipment
Hepa Filter No
Touch Screen Yes
Memory Internal Yes, 8 Gbyte
Connection
USB Port Yes
WLAN Yes
Accuracy
Layer Height 0.05 – 0.3 mm

 

Želite več informacij o Snapmaker J1 – IDEX 3D tiskalnik?

Izjava o omejitvi odgovornosti:

  1. Pred sestavljanjem ali uporabo 3D tiskalnika natančno preberite in upoštevajte navodila za uporabo.
  2. Spreminjanje in prilagajanje 3D tiskalnika je strogo prepovedano.
  3. Ne prevzemamo odgovornosti za kakršne koli težave, ki bi nastale zaradi sprememb ali firmware nadgradenj.
  4. Garancijo zagotavlja proizvajalec tiskalnika Snapmaker.
  5. Zamenjavo delov opravite le z originalnimi nadomestnimi deli Snapmaker namenjeni za ta tiskalnik.
  6. Vedno uporabite ustrezno izmenično napetost za vašo regijo.
  7. 3D tiskalnika ne postavljajte v bližino vnetljivih materialov ali kakršnih koli virov toplote. 3D tiskalnik uporabljajte samo v ustrezno prezračenih prostorih.
  8. Ohranite varno razdaljo od tiskalnika.
  9. Čeprav je tiskalnik sestavljen še ne zagotavlja, da bo 3D tisk modela izveden uspešno. 3D tiskalnik je le naprava, ki natisne 3D modele, ki ste mu jih posredovali. Za uspešen tisk je potrebno, da je 3D model pravilno zrisan in izvožen v primerno datoteko ter v programu za pripravo modela pravilno izbrane nastavitve tiskanja na podlagi geometrije modela, uporabljenega filamenta, …

Slike morda vedno ne izražajo dejanskega videza izdelka. Tehnične specifikacije lahko odstopajo od navedenih. Pridružujemo si pravico do tipkarskih napak, pomot, tehničnih sprememb, možnosti dobave, sprememb postopkov.
Imena izdelkov, storitev, logotipi in blagovne znamke omenjene ali navajane na spletni strani ali spletni trgovini so last njihovih imetnikov ali lastnikov.

Pred nakupom se posvetujte s strokovnjakom, zaradi lažje in pravilne izbire 3D tiskalnika primernega za vas. Pred menjavami delov in nadgradnjami firmware se prepričajte o postopkih menjav ali nadgradenj ter jih opravite le v primeru, da ste jih v popolnosti razumeli. V nasprotnem primeru se obrnite na strokovnjaka. Menjave, nadgradenje ter nadgradenje firmware izvedete na lastno odgovornost.


Dodatne informacije

Teža 500000 g
IZDELEK

3D TISKALNIK, OHIŠJE

ZNAMKA

SNAPMAKER

TEHNOLOGIJA

CNC, EDEN, FDM, FFF, LASER

EKSTRUDER

DVA NEODVISNA

VELIKOST MIZE

Širina 300mm do 399mm

VIŠINA TISKA

od 200-250mm

Brand

SNAPMAKER

Mnenja

Zaenkrat še ni mnenj.

Samo prijavljeni uporabniki, ki so kupili ta izdelek, lahko napišejo mnenje.